Catalogue
Search
Die-cast aluminium handle; body, body cover, rotor, racks and sliders in zamak; guide rail and bushing in delrin; stainless steel screws. With adjustable sliders 37 -60 mm
Die-cast aluminium handle; body, body cover, rotor, racks and sliders in zamak; guide rail and bushing in delrin; stainless steel screws. With adjustable sliders 30 -52 mm
Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 2 sliders with projection 44 mm
Die-cast aluminium handle; body, body cover, pull tray and rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Lift handle, 10 mm panel, with external Pull tray. For profile sections up to 64 mm
Extruded aluminium handle; body, cover and rotor made of zamak; anti-friction delrin bushings, screws and pins in stainless steel. Lift handle 10 mm, panel, without external Pull tray
Extruded aluminium handle; body, cover and rotor made of zamak; anti-friction delrin bushings, screws and pins in stainless steel. Two-side lift handle 10 mm, panel, For profiles with cross-section up to 68 mm
Die-cast aluminium handle; body, rotor and body cover in zamak, delrin bushings, stainless steel pin and screws.
mmade of extruded aluminium. H 15mm
Made of extruded aluminium. H 20 mm
die-cast aluminium handle, zamak reduced handle, body, rotor and body cover in zamak, delrin bushings, stainless steel pin and screws. Version combined with the standard KARMA handle.
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; plugs in nylon.
Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel. 100 mm body and 26 mm panel projection, LH version