Catalogue
Search
Corner joint made of die-cast aluminium; eccentrics in zamak. Dimensions 4x12 mm
Corner joint made of die-cast aluminium; eccentrics in zamak. Dimensions 4,2x17 mm
Corner joint made of die-cast aluminium; eccentrics in zamak. Dimensions 4,6x17 mm
Corner joint made of die-cast aluminium; eccentrics in zamak. Dimensions 4,1 x 12,6 mm
Blocks in zamak; screws in stainless steel. For top and bottom locks, to be combined with M8 threaded internal rods
Extruded aluminium body; M8 screw and M6 set screw in galvanized steel. H = 16,2 mm
Made of zamak; screws, pins and setscrews in stainless steel. For tilt and turn, with 12.5 mm screws.
Made of zamak; pins and setscrews in stainless steel; connecting pins in galvanized steel; rod in extruded aluminium. For tilt and turn, with 15 mm connecting pins and insert plate.
Die-cast aluminium handle; body, body cover and rotor made of zamak; anti-friction bushings in delrin, steel pin and screws. Two-side lift handle, 7 mm panel, for profile sections up to 64 mm
Hinge and plate in extruded aluminum, plates frame side, pin, eccentric height regulator, screws, cams and stainless steel rains; adjustment pawl in zamak; bush and adjustment bases in nylon. Load 140 kg
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically