Catalogue
Search
Extruded aluminium handle; body, cover and rotor made of zamak; anti-friction delrin bushings, screws and pins in stainless steel. Two-side lift handle 10 mm, panel, For profiles with cross-section up to 68 mm
mmade of extruded aluminium. H 15mm
Made of extruded aluminium. H 20 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 44 mm
Body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 2 sliders with projection 24 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 2 sliders with projection 24 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. LH offset handle cremone bolt, 1 slider with projection 44 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. RH offset handle cremone bolt, 1 slider with projection 44 mm
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt and turn logic manoeuvre LH-RH opening. Centre dist. 104 mm. Suitable for kit with anti-false manoeuvre top.
body and handle in die-cast aluminium; rack and pinion, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt and turn logic manoeuvre, LH-RH opening. Centre dist. 104 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.
Body and handle in die-cast aluminium; rack, pinion and body cover in galvanized zamak; guide rail and friction washer in delrin; screws in galvanized steel; locking screws of the cremone bolt on stainless steel profile. For tilt before turn manoeuvre, LH-RH opening. Interaxis dist. 98 mm. Suitable for kit with anti-false manoeuvre on the cremone bolt.
Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel. With key, panel projection 46 mm