Steel levers, adjustment body in zamak Short arm for tilt&turn sash. For LH-side opening (sash width from 430 mm to 560 mm). Maximum capacity: 120 Kg - 150 Kg in combination with 3301.50

Extruded aluminium and zamak hinges, counter plates in zamak and stainless steel, stainless steel screws, pins and set screws. Tilt and turn sash hinge kit. Maximum capacity 160kg.

Extruded aluminium and zamak hinges, counter plates in zamak and stainless steel, stainless steel screws, pins and set screws. Hinge kit for tilt&turn sash. Maximum capacity 100 kg.

Extruded aluminium and zamak hinges, counter plates and screws, arm with lever, stainless steel screws and set screws, zamak body. Side by side sash hinge kit. Maximum capacity 140 kg

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Short arm for tilt&turn sash. For Left opening (sashes from 470 to 600 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Short arm for tilt&turn sash. For Right opening (sashes from 470 to 600 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Long arm for tilt&turn sash. For Left opening (sashes from 601 to 1500 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. For Right opening (sashes from 601 to 1500 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For Right opening. Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Short arm for  tilt before turn. For Right opening (sashes from 470 to 600 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Short arm for tilt before turn. For Left opening (sashes from 470 to 600 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.

Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Long arm for tilt before turn. For Right opening (sashes from 601 to 1500 mm). Maximum load 100 kg - 130 kg in combination with 3310.51 - 150 kg in combination with 3310.50+1211 (with limited opening 90°). Adaptable to coplanar profiles up to a 12 mm step.