Sometimes the solutions are simpler than we believe
We chose to use the term “Smart” to define the smart products, or better said “clever” that, for various reasons such as shortened times, easy installation, minimal aesthetic impact, easily solve the most common problems of the end user or the professional installer.
“FAST LOCK” the anti-false manoeuvre device
The innovative anti-false manoeuvre system for multi-point lock series for sliding system, has been designed to prevent the handle from rotating when the sash is open and prevent damage to the lugs and hooks so that they do not collide with the frame.
Why buy Fast Lock?
- Easy and quick to install
- prevent damage to the lugs and hooks
- guarantee Level of safety and comfort
- Avoid the matched retainer installation
GO TO CATALOGUE
WATCH THE VIDEO
“UNA” THE NEW MULTI-PURPOSE ALIGNMENT CORNER JOINTS
The new line of multi-purpose alignment corner joints for pinning/chamfering designed by Master to expand the range with several variants to suit most of the systems available on the market.
Why buy UNA?
- Multi-purpose system for locking by pinning and by chamfering
- Dedicated glue injection hole for perfect sealed
GO TO CATALOGUE
WATCH THE VIDEO
“EXTRA” THE NEW ALIGNMENT CORNER JOINTS WITH ADJUSTABLE ECCENTRIC PINS
The new line of alignment corner joints with adjustable eccentric pins designed by Master to expand the range with several variants to suit most of the systems available on the market.
Why buy EXTRA?
- Locking with eccentric pins without additional machining
- Dedicated glue injection hole for perfect sealed
GO TO CATALOGUE
WATCH THE VIDEO
“FAST LOCK” The new embedded handle
The new embedded handles with a modern, linear design and a patented pivot pin rotation mechanism that allows the frame to be opened only when the lever is rotated 180 degrees.
Why buy FAST LOCK?
- avoid possible accidental breakage thanks to a spring snap that pulls the lever back into the case
- can be used indifferently for right and left-hand opening
- quick and easy to install it is also combinable to pull handle
GO TO CATALOGUE
WATCH THE VIDEO
“EMPIRE” bidirectional gearbox for curtain wall
The new bidirectional gearbox, instead of the classical solution of cremone bolt with offset handle, to use crank handle available in different lines with different design
Why buy EMPIRE?
• Fixing hole interaxis 43 mm;
• Stainless steel cover;
• Fast fixing to the profile by means of pre-assembled stainless-steel cams;
• All the materials used guarantee high mechanical resistance;
GO TO CATALOGUE
WATCH THE VIDEO
“EMPIRE” limiter opening arm with release key
The new Empire limiter opening arm with release key is designed to limit the opening of the sash. Thanks to the release mechanism with key, it allows to unlock the opening of the window to simplify maintenance and cleaning operations of the glass surfaces of the curtain wall.
Why Buy EMPIRE?
- friction arm
- release mechanism with key
- made entirely of AISI 304 stainless steel
- it can be installed on all the main types of profiles
GO TO CATALOGUE
WATCH THE VIDEO
“BI-HID” – Two-way lever latch for passive sash
It is the Master Italy passive sash movement system, created to simplify the opening and closing process of the passive sash. It allows the simultaneous opening of both upper and lower rod end.
Why Buy BI-HID?
- Simultaneous opening of both upper and lower rod end
- Maintaining the 45° opening position of the lever to avoid breakage in case of accidental closure of the active sash
- Zamak rod end with a thin shape
- Derlin compensators, to avoid movements and vibrations inside the groove
GO TO CATALOGUE
WATCH THE VIDEO
Sash support kit with roller
With the Sash support kit with roller, the load on the hinges is reduced, ensuring greater durability of the frame.
Why Buy sash support kit with roller?
- applicable on already installed frame
- it reduces the load on the hinges
GO TO CATALOGUE
WATCH THE VIDEO
Adjustable Two-side Keeper
The two-side adjustable keeper is suitable for two-sash frames and allows for the insertion of the terminal on the frame and the closing of the latter.
Why Buy Two-side Adjustable Keeper?
- pressure adjustment +/- 2 mm,
- option to adjust the primary and the secondary sash differently
GO TO CATALOGUE
WATCH THE VIDEO
DISCOVER MORE
“HOOK”, the additional locking point
It helps keep the proper alignment between the jumbs and improve the performance of air permeability, water tightness and wind resistance of the frames.
Why buy HOOK?
- it can be used on all most common types of profiles
- striker with adjustable pressure slider (+ / – 2.5 mm)
- applicable on already installed frame
- it’s an invisible locking point
- anti-lifting system: two lateral reinforcements on the joining point prevent the sash from slipping
GO TO CATALOGUE
DISCOVER MORE
WATCH THE VIDEO
“BING” the universal two-way mechanism
BING is the universal two-way mechanism suitable for both internal and external opening casement window frames. You can use the Master design cremone bolt on any type of frame.
Why Buy Bing?
- you can also apply the universal cremone bolt and the two-side cremone bolt
- backset adjustable from 15 to 35 mm
- it can be applied on internal and external opening frames
- an outer casing covers the concealed pull levers
- a single article that can be installed on Erre 40 profiles and Euro Groove
GO TO CATALOGUE
“COMFORT MINI” the compact cremone bolt line
The cremone bolt belongs to the Comfort Line, recognized and appreciated on the market for years due to its quality and cutting-edge ergonomics and design. The small cremone bolt is ideal for applications on external opening frames and in cases where there is very little room for manoeuvre
Why Buy COMFORT MINI?
- small size (width 24 mm and depth 48 mm)
- panel with variable projection from 30, 50 and 70 mm
- suitable for all profile types, from minimal to enlarged
- versions: single, double and with key
- available in all finishes, including special ones
GO TO CATALOGUE
COMFORT PLUS, the quick fixing cremone bolt for external opening.
COMFORT PLUS is the cremone bolt belonging to the Comfort Line, which can be used for external opening with reduced dimensions and a quick fixing system (patented).
Perchè acquistare COMFORT PLUS?
- The patented joint profile fixing system is made of two plates
- it can be used for external opening and internal opening casement window frame
- sliders with adjustable depth (from 12.5 mm to 65 mm)
- available with key, equipped with a new cylinder with 200 numbers
GO TO CATALOGUE
