Catalogue
Search
Die-cast aluminum handle, zamak case, cover and rotor, delrin washer, stainless steel screws and grub screws, galvanized steel pin. For sash width from 80 to 100 mm
Support and block in zamak; Screws, bearing axle and side plates in stainless steel; Nylon shims; Roller bearings in tempered steel coated in nylon with glass fiber. Additional roller, capacity 350 kg per sash, in combination with art. 6676.20.
External support in nylon, internal support in galvanized zamak; set screw, nut and adjustment screw in galvanized steel; roller bearings in hardened steel; roller in stainless steel. Capacity 240 kg per sash
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Made of zamak; screws, pins and setscrews in stainless steel. For tilt and turn, with 12.5 mm screws.
Made of zamak; screws, pins and setscrews in stainless steel. For tilt and turn, with 17.5 mm screws.
Made of zamak; pins and setscrews in stainless steel; connecting pins in galvanized steel; rod in extruded aluminium. For tilt and turn, with 15 mm connecting pins and insert plate.
Made of zamak; pins and setscrews in stainless steel; connecting pins in galvanized steel; rod in extruded aluminium. For tilt and turn, with 21 mm connecting pins and insert plate.
Made of zamak; pins and setscrews in stainless steel; connecting pins in galvanized steel; rod in extruded aluminium. For tilt and turn, with 24 mm connecting pins and insert plate.
Made of zamak; pins and setscrews in stainless steel; connecting pins in galvanized steel; rod in extruded aluminium. For tilt and turn, with 30 mm connecting pins and insert plate.
Brackets, cover and chain attachment made of zamak, pin made of steel. Bracket kit for top hung with actuator on frame.
Made of zamak, nuts and setscrew in stainless steel. Version for slides, casement and folding. Adjustable backset from 30 to 40 mm, witk key, stroke 25 mm
Sections legend
