Catalogue
Search
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Lower and upper hinge kit for casement. For right opening. Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Transom opening hinge kit. Maximum capacity: 100 Kg. Adaptable to coplanar profiles up to a 12 mm step
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. For Left opening. Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Levers, pins, cams, and frame angle support in stainless steel, adjustment body in zamak. Top hinge for casement. For Right opening.Maximum capacity: 100 Kg - 130 Kg in combination with 3310.51. Adaptable to coplanar profiles up to a 12 mm step
Lever and rods in stainless steel, support and adjustment body in zamak. Bottom hinge for tilt&turn and casement sash. For LH-side opening. Maximum capacity: 130 Kg - 150 Kg in combination with 3310.50
Hinge and plate in extruded aluminum, plates frame side, pin, eccentric height regulator, screws, cams and stainless steel rains; adjustment pawl in zamak; bush and adjustment bases in nylon. Load 140 kg
Die-cast aluminium handle, body, body cover and rotor in zamak, screws and pin in steel. Double offset handle for profile sections up to 64 mm
Extruded aluminium body; M8 screw and M6 set screw in galvanized steel. H = 16,2 mm
Stainless steel lever, pins, screw and grub screws; Zamak blocks; nylon blocks. For handle-controlled casement opening that can be installed vertically
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 40 to 60 mm
Die-cast aluminum handle; Rotor, case and cover in zamak; Derlin washer; Spring, grub screw and pin in galvanized steel; screws in stainless steel. For sash width from 60 to 80 mm
Sections legend
